NAME
    Data::Dmp - Dump Perl data structures as Perl code

VERSION
    This document describes version 0.242 of Data::Dmp (from Perl
    distribution Data-Dmp), released on 2022-08-28.

SYNOPSIS
     use Data::Dmp; # exports dd() and dmp()
     dd [1, 2, 3]; # prints "[1,2,3]"
     $var = dmp({a => 1}); # -> "{a=>1}"

    Print truncated dump (capped at
    "$Data::Dmp::OPT_MAX_DUMP_LEN_BEFORE_ELLIPSIS" characters):

     use Data::Dmp qw(dd_ellipsis dmp_ellipsis);
     dd_ellipsis [1..100];

DESCRIPTION
    Data::Dmp is a Perl dumper like Data::Dumper. It's compact (only about
    200 lines of code long), starts fast and does not use any non-core
    modules except Regexp::Stringify when dumping regexes. It produces
    compact single-line output (similar to Data::Dumper::Concise). It
    roughly has the same speed as Data::Dumper (usually a bit faster for
    smaller structures) and faster than Data::Dump, but does not offer the
    various formatting options. It supports dumping objects, regexes,
    circular structures, coderefs. Its code is first based on Data::Dump: I
    removed all the parts that I don't need, particularly the pretty
    formatting stuffs) and added some features that I need like proper regex
    dumping and coderef deparsing.

VARIABLES
  $Data::Dmp::OPT_PERL_VERSION
    String, default: 5.010.

    Set target Perl version. If you set this to, say 5.010, then the dumped
    code will keep compatibility with Perl 5.10.0. This is used in the
    following ways:

    *   passed to Regexp::Stringify

    *   when dumping code references

        For example, in perls earlier than 5.016, feature.pm does not
        understand:

         no feature ':all';

        so we replace it with:

         no feature;

  $Data::Dmp::OPT_REMOVE_PRAGMAS
    Bool, default: 0.

    If set to 1, then pragmas at the start of coderef dump will be removed.
    Coderef dump is produced by B::Deparse and is of the form like:

     sub { use feature 'current_sub', 'evalbytes', 'fc', 'say', 'state', 'switch', 'unicode_strings', 'unicode_eval'; $a <=> $b }

    If you want to dump short coderefs, the pragmas might be distracting.
    You can turn turn on this option which will make the above dump become:

     sub { $a <=> $b }

    Note that without the pragmas, the dump might be incorrect.

  $Data::Dmp::OPT_DEPARSE
    Bool, default: 1.

    Can be set to 0 to skip deparsing code. Coderefs will be dumped as
    "sub{"DUMMY"}" instead, like in Data::Dump.

  $Data::Dmp::OPT_STRINGIFY_NUMBERS
    Bool, default: 0.

    If set to true, will dump numbers as quoted string, e.g. 123 as "123"
    instead of 123. This might be helpful if you want to compute the hash of
    or get a canonical representation of data structure.

  $Data::Dmp::OPT_MAX_DUMP_LEN_BEFORE_ELLIPSIS
    Int, default: 70.

    Used by "dd_ellipsis" and "dmp_ellipsis".

BENCHMARKS
     [1..10]:
                  Rate/s Precision/s  Data::Dump Data::Dumper Data::Dmp
     Data::Dump    24404          95          --       -61.6%    -75.6%
     Data::Dumper  63580         210 160.5+-1.3%           --    -36.4%
     Data::Dmp     99940         130 309.5+-1.7% 57.18+-0.55%        --
 
     [1..100]:
                   Rate/s Precision/s  Data::Dump Data::Dumper Data::Dmp
     Data::Dump    2934.3         7.8          --       -75.3%    -76.2%
     Data::Dumper   11873          32 304.6+-1.5%           --     -3.7%
     Data::Dmp    12323.4           4   320+-1.1%   3.8+-0.28%        --
 
     Some mixed structure:
                  Rate/s Precision/s   Data::Dump   Data::Dmp Data::Dumper
     Data::Dump     7161          12           --      -69.3%       -78.7%
     Data::Dmp     23303          29 225.43+-0.7%          --       -30.6%
     Data::Dumper  33573          56  368.8+-1.1% 44.07+-0.3%           --

FUNCTIONS
  dd
    Usage:

     dd($data, ...); # returns $data

    Exported by default. Like "Data::Dump"'s "dd" (a.k.a. "dump"), print one
    or more data to STDOUT. Unlike "Data::Dump"'s "dd", it *always* prints
    and return *the original data* (like XXX), making it convenient to
    insert into expressions. This also removes ambiguity and saves one
    "wantarray()" call.

  dmp
    Usage:

     my $dump = dmp($data, ...);

    Exported by default. Return dump result as string. Unlike "Data::Dump"'s
    "dd" (a.k.a. "dump"), it *never* prints and only return the dump result.

  dd_ellipsis
    Usage:

     dd_ellipsis($data, ...); # returns data

    Just like "dd", except will truncate its output to
    "$Data::Dmp::OPT_MAX_DUMP_LEN_BEFORE_ELLIPSIS" characters if dump is too
    long. Note that truncated dump will probably not be valid Perl code.

  dmp_ellipsis
    Usage:

     my $dump = dd_ellipsis($data, ...); # returns data

    Just like "dmp", except will truncate dump result to
    "$Data::Dmp::OPT_MAX_DUMP_LEN_BEFORE_ELLIPSIS" characters if dump is too
    long. Note that truncated dump will probably not be valid Perl code.

FAQ
  When to use Data::Dmp? How does it compare to other dumper modules?
    Data::Dmp might be suitable for you if you want a relatively fast
    pure-Perl data structure dumper to eval-able Perl code. It produces
    compact, single-line Perl code but offers little/no formatting options.
    Data::Dmp and Data::Dump module family usually produce Perl code that is
    "more eval-able", e.g. it can recreate circular structure.

    Data::Dump produces visually nicer output (some alignment, use of range
    operator to shorten lists, use of base64 for binary data, etc) but no
    built-in option to produce compact/single-line output. It's more
    suitable for debugging. It's also relatively slow. I usually use its
    variant, Data::Dump::Color, for console debugging.

    Data::Dumper is a core module, offers a lot of formatting options (like
    disabling hash key sorting, setting verboseness/indent level, and so on)
    but you usually have to configure it quite a bit before it does exactly
    like you want (that's why there are modules on CPAN that are just
    wrapping Data::Dumper with some configuration, like
    Data::Dumper::Concise et al). It does not support dumping Perl code that
    can recreate circular structures.

    Of course, dumping to eval-able Perl code is slow (not to mention the
    cost of re-loading the code back to in-memory data, via eval-ing)
    compared to dumping to JSON, YAML, Sereal, or other format. So you need
    to decide first whether this is the appropriate route you want to take.
    (But note that there is also Data::Dumper::Limited and Data::Undump
    which uses a format similar to Data::Dumper but lets you load the
    serialized data without eval-ing them, thus achieving the speed
    comparable to JSON::XS).

  Is the output guaranteed to be single line dump?
    No. Some things can still produce multiline dump, e.g. newline in
    regular expression.

HOMEPAGE
    Please visit the project's homepage at
    <https://metacpan.org/release/Data-Dmp>.

SOURCE
    Source repository is at <https://github.com/perlancar/perl-Data-Dmp>.

SEE ALSO
    Data::Dump and other variations/derivate works in Data::Dump::*.

    Data::Dumper and its variants.

    Data::Printer.

    YAML, JSON, Storable, Sereal, and other serialization formats.

AUTHOR
    perlancar <perlancar@cpan.org>

CONTRIBUTING
    To contribute, you can send patches by email/via RT, or send pull
    requests on GitHub.

    Most of the time, you don't need to build the distribution yourself. You
    can simply modify the code, then test via:

     % prove -l

    If you want to build the distribution (e.g. to try to install it locally
    on your system), you can install Dist::Zilla,
    Dist::Zilla::PluginBundle::Author::PERLANCAR,
    Pod::Weaver::PluginBundle::Author::PERLANCAR, and sometimes one or two
    other Dist::Zilla- and/or Pod::Weaver plugins. Any additional steps
    required beyond that are considered a bug and can be reported to me.

COPYRIGHT AND LICENSE
    This software is copyright (c) 2022, 2021, 2020, 2017, 2016, 2015, 2014
    by perlancar <perlancar@cpan.org>.

    This is free software; you can redistribute it and/or modify it under
    the same terms as the Perl 5 programming language system itself.

BUGS
    Please report any bugs or feature requests on the bugtracker website
    <https://rt.cpan.org/Public/Dist/Display.html?Name=Data-Dmp>

    When submitting a bug or request, please include a test-file or a patch
    to an existing test-file that illustrates the bug or desired feature.